2015 CE jet Hand Dryer with UV sterilization and HEPA filter AK2030
|FOB Price:||Get Latest Price|
|Min. Order:||10 Pieces|
|Transport Package:||with Plastic Membrane to Protect The Goods|
|Payment Terms:||L/C, T/T, D/P, Western Union, Paypal, Money Gram, negotiable|
- Model NO.: 2030
- Installation: Brakcet or Wall-Mounted: Cover: Fireproof ABS
- Specification: CE, CB, EMC, LVD, With CB test report
- HS Code: 8516330000
- Any Colors Are Available: The No. 1 Quality in China
- Trademark: AIKE, best hand dryer of China
- Origin: China
Cover material: ABS plastic
Volts: 220-240V / 110-130V
Consumption: 7.1A (at 220V)
Engine power: 650W
Heat resistance power: 1000W
Total power: 1650W
RPM engine: 20,000
Engine type: Universal
Air flow speed: 300 - 350 Km/h
Air flow capacity: 190 CBM/h
Noise level: 65 dB
Air temperature: 20-40 centigrade
Approved by: TUV GS CE
Color: According to customer's requirement
Warranty: 3 years for motor, 1 year for whole body
1 UV sterilization
Every 24 hours, UV lights on for 1 hour to clean the air-inlet.
2 HEPA filter
It ensures the air goes to hands is hygiene.
You can change it once per year.
Switch at the bottom
If you need to control the switchesbox, first you need to take out the water tray at the right side, then you need to open the cover of switch box. It is double protected so it is more safe.
3 Easily change plug and cable
For example, if you need to change from 110V cable to 220V cable, you can change them at the back side easily. It just cost you 1 minute.
HOW IT WORKS
First, the jet hand dryer must be mounted onto the wall in the desired facility and then can either be plugged into an outlet or hardwired by an electrician.
All the user needs to do is insert their hands into the gap and slowly pull them out while the screen counts down the seconds. It works in just 10 seconds - completely removing water from the palms and backs of the hands by means of two discharges of air on either side. Hands will be completely dry, with no hand rubbing or turning required. The built-in heater facilitates an immediate release of warm air to speed up the hand drying process while the waste water is stored in a tank for easy and convenient disposal.
It's Quick! And it's that easy.
HOW IT IS INSTALLED (with picture)
It is installed with a bracket at the back side, so it's really easy!
Hands feel dry in as little as 10 seconds
The powerful discharge of air on either side of the hand leaves moisture dripping and hands dry.
The release of warm air from the built-in heaters helps speed up the hand drying process.
BRUSHLESS MOTOR (no carbon)
Brushless motor hand dryer (or we say no carbon hand dryer) lifetime 7 to 10 years, will not make any pollution to the air, don't make any tiny dust.
While brush motor lifetime no more than 3 years, it will produce tiny carbon powders when running, which is not good for the clean air, NEVER been allowed in electronics workshops, pharmacy workshops, foodstuff workshops, etc.
Each unit is packed with strong plastic membrane, so the product can hardly get broken during transportation.
Meeting the factory(food plants, pharmaceutical, electronics factory, plastics factory), building, entertainment, hotel restaurant, hospital, clubs, railway stations, airports, ect.
|model||motor||RPM||guarantee||motor power||heating power||total power||unit size||1 unit package size|
|AK2030||DC brushless motor||20, 000||3 years for motor, 1 year for whole units||750W||900-1300W||1650-2050W||68.5*30*22cm||73*37*29cm|
|air speed||net weight||gross weight||ying hands time||Low speed / High speed switch||ON/OFF switch||Hot air / cold air switch||rated voltage||air temperature|
|95m/s 65m/s||9.5KG||11KG||10 seconds||YES||YES||YES||100-130V or 220-240V, 50/60HZ||20 - 40 degree|